Sanicubic 2

Each of the pumps is fitted with a high performance maceration system. The 2 pumps operate alternately. In the event of inflow overload, both motors run at the same time (or if one of the pumps is faulty, the other one takes over).
The SANICUBIC® 2 Classic tank is fitted with 2 dip tubes; one tube controls motor operation, and the other one controls the alarm system.  Long pickup tube (normal operation): as soon as the waste water level in the tank reaches the triggering point in the long tube, the pumping system starts up.  Short pickup tube (inflow overload operation): if the waste water level in the tank reaches the upper point, a contact is closed and the auxiliary pumping system is triggered.
The contact also sets off an audible and visual alarm. The general alarm LED on the SANICUBIC® Classic control panel switches to red. The system sends a high-frequency overload signal to the remote alarm unit.
It is the most powerful pump of Saniflo Professional Range. It has been designed for discharging waste from multiple WCs and other waste water producing appliances. The unit is capable of discharging waste through 50mm pipework up to 11 m vertically or 10 m horizontally or a lesser combination of vertical x horizontal.

Features:

• Possible connections: several WC’s, waste waters from kitchen, bathroom, laundry room
• Recommended waste pipe diameter: 50 mm
• Inlet diameter: • 1 inlet 40/50 mm • 4 inlets 40/50/100/110 mm
• Vent diameter: DN 50 mm
• Tank volume: 47 L
• Electrical power supply: 220-240 V / 50 Hz
• Motor power rating: 2 x 1 500 W
• Maximum current input: 13 A
• Electrical classifi cation: I
• Working temperature: 35°C
• Maximum admissible waste water
• temperature: 70°C (max 5 min)
• Index of protection: IP67
• Net weight (accessories included): 30 kg
• European Standard : EN 12050-1
• 2 non-return valves
• Possibility to fit an external alarm (SFA option)
• GATE VALVES, optional, please refer to p. 25